How to configure OS X (10.x) to connect to the Valp.Net High-Speed Internet service
Rating: -1
# From the Apple menu, select System Preferences...
# On the System Preferences window, select the Network icon
Click to enlarge
# From the Show: menu, select your Ethernet card
# Click the TCP/IP tab, and from the Configure IPv4: menu select Using DHCP
# Select the Apply Now button. At this point, your computer should obtain an IP Address and all the other settings from the Valp.Net DHCP server. You should be able to surf the web, send and receive email etc. If you are still unable to connect to the internet, please proceed to step 6.
# Select the PPPoE tab, and make sure that Valp.Net using PPPoE is not selected.
# Select the Proxies tab, and make sure that none of the proxies are selected.
Note: You may or may not select Use Passive FTP Mode (PASV) - it does not affect your internet connection or ability to go online. However, once you are connected, if you have trouble connecting to an FTP site, you may opt to change your selection at that time.
# Your internet settings are now configured correctly to connect to the Valp.Net High-Speed Internet Service. Click Apply Now and you should be able to surf the web, send and receive email etc.
